Headlight and fender

Here is the headlight glass lens with a few coats of Krylon yellow stained-glass paint.  It gives it a nice amber look.

The taillight assembly, made from a scrap piece of 2.5" exhaust tubing, cut and ground to fit the contour of the seat cowl: 

I also made a rear fender, out of some scrap aluminum sheet.  Hand bent and hammered.  It bolts underneath to the seat itself, with the bolt heads fitting perfectly inside the frame tubes at the back:

First time I've had all the little accessory bits on the bike, like the headlight, heat shields, tailight, fender etc.