30 March, 2016
28 March, 2016
27 March, 2016
Picturesque Hoorn
We spent Easter day in Hoorn (north of Amsterdam) taking a walking tour of the cobblestone streets and traditional Dutch row houses. Since it was Easter and a Sunday, everything was closed in the morning, but thankfully a few shops opened up after lunch. It was absolutely the most picturesque town you've ever seen! Part of our morning outing included coffee and cake hosted by a local family in their home. Our family was a divorced mom with a high school aged daughter who were so lovely and very gracious to answer all our questions about Dutch life. It was the highlight of our day!
Sent from my Verizon Wireless 4G LTE smartphone
26 March, 2016
25 March, 2016
Arrival in Amsterdam
Made it into Amsterdam this morning at 10:30 am local time (8 hrs ahead of the West coast). After a short drive to the boat, we had a light lunch aboard before hitting the streets on foot to check out the sights and sounds. After wandering around for an hour we finally made our way to Central Station, which in reality is only about 15 mins from the boat when you know the way. By then it was raining pretty good so we headed back for a much needed nap since we were only running on about 3 hrs of sleep. Now we're setting up for our Welcome Aboard talk, followed by dinner and a wooden shoemaking demonstration. Tomorrow morning is a canal cruise, so we're excited about that!
Sent from my Verizon Wireless 4G LTE smartphone
06 March, 2016
28 February, 2016
DKW Progress
07 February, 2016
DKW Engine Progress
I have made some progress on the DKW engine build. It's been a fun process, but I have run into a few "issues" here and there. But nothing I couldn't overcome.
Step 1 was reassembly of the clutch. Top photo shows the assembly back together. Middle photo shows it being assembled. Getting all the "teeth" on the discs and basket lined up, while keeping the springs in place was sort of comical. And realize this entire assembly is about 3" in diameter, so lots of fiddly little parts. The third photo shows the entire assembly spread out. Like other moto clutches, this uses a series of discs and steel plates, that all clamp together. This way you can fit more clamping area inside a small diameter.
Then I got some of the internals installed into one half of the engine case. I had to buy a few NOS parts, including a new 1st gear, new layshaft, and of course all new bearings and seals. Doing the bearings was actually kind of fun. Stick the cases in the oven for a few minutes so they expand a little, and slip the bearings in with a little bit of pressing. Then as the cases cool, the bearings are nice and snug.
I took a lot of photos during disassembly, which was good. The factory engine manual is very helpful, but in a weird 1970s translated german to english sort of way. So a few sentences are confusing, and the terms they use for various shafts and shims made me scratch my head a few times. But everything went back together fairly easily.
The only real problem I ran into was there were apparently many different types of 1st gears, which was the only gear I need a replacement for. The original had a tooth knocked off. My 5-speed engine needed a 106-100 part#. The guy I bought the NOS parts from accidentally sent me a 106-200, which looks identical. But when I finally got around to fitting it, I realized it must have been a 1st gear from a 6-spd trans, as it was thinner. Luckily my source down in LA sent me a correct gear asap. But when I got it, it was labelled 106-000. It was the correct thickness, but the back side of the gear was lacking a small chamfer cut into. Without this chamfer, the backside of the gear lightly rubbed the aluminum case on the inside. Long story made even longer, my new little Mini-lathe came to the rescue. I chucked it up, and was able to cut a light chamfer into it, so it fit just fine.
At this point, I pulled out my NOS gasket kit. As the seller mentioned, the gasket we're laying very flat anymore. He didn't charge me much for a full kit, and it included the seals too, so I was expecting to have to recreate a few new gaskets. The big center case gasket was indeed shrunken a little bit, making it so that all the bolt holes were not lined up. So I scratched my head, and set about making a new gasket.
I used a spare wooden shelf board, and marked and drilled all the case bolt holes into it. This way I could stick the case bolts through it, based on their real position using the case as a guide. Then I carefully stretched the NOS gasket over the bolts, and marked around it. Then I trimmed the new gasket out with a razor, applied a tiny bit of permatex to one side of the case, set the new gasket on it, and let it sort of bond for 30 minutes. This helped it lay out flat, and kept all the holes in position. The last step was to turn that side of the case upside down, and fit onto the case half with all the gubbins in it. I was expecting this to be a pain in the arse, having to line up multiple shafts, multiple case holes etc., and fight a gasket lining up. Reality was it just slide down and fit easy. Sorry for the random order of the following four photos. Sometime blogger has a mind of its own.
Step 1 was reassembly of the clutch. Top photo shows the assembly back together. Middle photo shows it being assembled. Getting all the "teeth" on the discs and basket lined up, while keeping the springs in place was sort of comical. And realize this entire assembly is about 3" in diameter, so lots of fiddly little parts. The third photo shows the entire assembly spread out. Like other moto clutches, this uses a series of discs and steel plates, that all clamp together. This way you can fit more clamping area inside a small diameter.
Then I got some of the internals installed into one half of the engine case. I had to buy a few NOS parts, including a new 1st gear, new layshaft, and of course all new bearings and seals. Doing the bearings was actually kind of fun. Stick the cases in the oven for a few minutes so they expand a little, and slip the bearings in with a little bit of pressing. Then as the cases cool, the bearings are nice and snug.
I took a lot of photos during disassembly, which was good. The factory engine manual is very helpful, but in a weird 1970s translated german to english sort of way. So a few sentences are confusing, and the terms they use for various shafts and shims made me scratch my head a few times. But everything went back together fairly easily.
The only real problem I ran into was there were apparently many different types of 1st gears, which was the only gear I need a replacement for. The original had a tooth knocked off. My 5-speed engine needed a 106-100 part#. The guy I bought the NOS parts from accidentally sent me a 106-200, which looks identical. But when I finally got around to fitting it, I realized it must have been a 1st gear from a 6-spd trans, as it was thinner. Luckily my source down in LA sent me a correct gear asap. But when I got it, it was labelled 106-000. It was the correct thickness, but the back side of the gear was lacking a small chamfer cut into. Without this chamfer, the backside of the gear lightly rubbed the aluminum case on the inside. Long story made even longer, my new little Mini-lathe came to the rescue. I chucked it up, and was able to cut a light chamfer into it, so it fit just fine.
At this point, I pulled out my NOS gasket kit. As the seller mentioned, the gasket we're laying very flat anymore. He didn't charge me much for a full kit, and it included the seals too, so I was expecting to have to recreate a few new gaskets. The big center case gasket was indeed shrunken a little bit, making it so that all the bolt holes were not lined up. So I scratched my head, and set about making a new gasket.
I used a spare wooden shelf board, and marked and drilled all the case bolt holes into it. This way I could stick the case bolts through it, based on their real position using the case as a guide. Then I carefully stretched the NOS gasket over the bolts, and marked around it. Then I trimmed the new gasket out with a razor, applied a tiny bit of permatex to one side of the case, set the new gasket on it, and let it sort of bond for 30 minutes. This helped it lay out flat, and kept all the holes in position. The last step was to turn that side of the case upside down, and fit onto the case half with all the gubbins in it. I was expecting this to be a pain in the arse, having to line up multiple shafts, multiple case holes etc., and fight a gasket lining up. Reality was it just slide down and fit easy. Sorry for the random order of the following four photos. Sometime blogger has a mind of its own.
02 January, 2016
DKW Update - Free the Sprocket!
For no reason in particular, I stalled out on the DKW project. I got to the point where I needed some engine parts, in order to reassemble it. After much inspection and measuring, I found the cylinder bore needed a bore job, I need a new piston, and I couldn't for the life of me get the sprocket off the shaft. It is a press fit onto a taper, held tight with a large nut. Apparently they like to weld themselves to the shaft.
I soaked, I heated, I soaked, I hit it with a hammer, I soaked some more, I installed a large puller pounded as tight as I could get with my 1/2" impact. Nothing.
Then...as luck would have it...I came across a guy in Reseda selling NOS DKW/Sachs engine parts. This was roughly four days before Christmas, and Susan's youngest Sister happens to live in Reseda, and was coming up for a visit. So I struck a deal for a new cylinder housing that cleaned up very nicely, a NOS piston kit, a NOS sprocket and nut, and a NOS set of points. All for the same price a DKW specialist shop sells just a piston kit for.
So the old seized sprocket had become redundant, and I decided drastic measures were in order. That meant getting out the angle grinder, and going to town on it. 10 minutes later, and a face and mouth full of grinding dust later, I was able to finally remove the sprocket, and pull the shaft out of the engine case.
So now I'm soaking the engine cases to help de-grime the past four decades worth of grease, oil, and dirt. One of the pain in the asses about heavily finned air-cooled engines, are the deep fins that collect all kinds of debris. I'm half tempted to find a local machine shop to dunk the cases in, before I give them a wire brushing and polishing.
Then, I need to order a set of bearings, seals, and gaskets for the re-assembly.
Exciting photos below proving I did do some work:
I soaked, I heated, I soaked, I hit it with a hammer, I soaked some more, I installed a large puller pounded as tight as I could get with my 1/2" impact. Nothing.
Then...as luck would have it...I came across a guy in Reseda selling NOS DKW/Sachs engine parts. This was roughly four days before Christmas, and Susan's youngest Sister happens to live in Reseda, and was coming up for a visit. So I struck a deal for a new cylinder housing that cleaned up very nicely, a NOS piston kit, a NOS sprocket and nut, and a NOS set of points. All for the same price a DKW specialist shop sells just a piston kit for.
So the old seized sprocket had become redundant, and I decided drastic measures were in order. That meant getting out the angle grinder, and going to town on it. 10 minutes later, and a face and mouth full of grinding dust later, I was able to finally remove the sprocket, and pull the shaft out of the engine case.
So now I'm soaking the engine cases to help de-grime the past four decades worth of grease, oil, and dirt. One of the pain in the asses about heavily finned air-cooled engines, are the deep fins that collect all kinds of debris. I'm half tempted to find a local machine shop to dunk the cases in, before I give them a wire brushing and polishing.
Then, I need to order a set of bearings, seals, and gaskets for the re-assembly.
Exciting photos below proving I did do some work:
13 December, 2015
New Toys Inbound
I received a more generous than normal Christmas bonus from work, so I decided to splurge a bit and bought a few new tools. The biggest of the which is a new AHP AlphaTIG 200x Tig welding machine. I love my Hobart Handler Mig machine, but I have been wanting to weld aluminum for a while now, and I've discovered a lot of the steel welding I do on my little bike projects is just a bit too small and delicate for best results using the Hobart.
Entry level TIG machines have been around a few years, and there are really three options to go with. I did some research, including watching this video, which compares the three items:
The Alpha seemed to have the longest list of "pros" and the shortest list of "cons." The biggest specs I needed were 115v capable, AC/DC (AC for aluminum) and something that uses standard parts. The Alpha has a few nice features as standard, including a flexible torch head, better foot control, and adjustable pulse control.
The nicest part of the Alpha? I purchased it off Amazon, along with about half a dozen tools and accessories. I grabbed some tungsten electrodes in various sizes for both AL and steel, some steel and AL filler rod, a new solar lens for my welding helmet, and a magnifying lens for the helmet too. I'm also going to pick up a few more welding magnets, and a special vise for clamping tubing together for welding.
Tig looks like a lot of fun, sort of a mixture of mig and oxy welding. I always enjoyed oxy welding, as it felt more like "art" to me, in terms of moving the puddle around, being able to adjust how much filler rod you used etc. So I'm sure I will have a LOT to learn, and will be spending a few hours in the garage over the xmas break practicing on scrap pieces. I'll also need to pick up a new bottle for the AL gas.
Entry level TIG machines have been around a few years, and there are really three options to go with. I did some research, including watching this video, which compares the three items:
The Alpha seemed to have the longest list of "pros" and the shortest list of "cons." The biggest specs I needed were 115v capable, AC/DC (AC for aluminum) and something that uses standard parts. The Alpha has a few nice features as standard, including a flexible torch head, better foot control, and adjustable pulse control.
The nicest part of the Alpha? I purchased it off Amazon, along with about half a dozen tools and accessories. I grabbed some tungsten electrodes in various sizes for both AL and steel, some steel and AL filler rod, a new solar lens for my welding helmet, and a magnifying lens for the helmet too. I'm also going to pick up a few more welding magnets, and a special vise for clamping tubing together for welding.
Tig looks like a lot of fun, sort of a mixture of mig and oxy welding. I always enjoyed oxy welding, as it felt more like "art" to me, in terms of moving the puddle around, being able to adjust how much filler rod you used etc. So I'm sure I will have a LOT to learn, and will be spending a few hours in the garage over the xmas break practicing on scrap pieces. I'll also need to pick up a new bottle for the AL gas.
05 December, 2015
Freddy To-Do List - Updated
I decided to create a to-do list for Freddy, the 1968 Ssaab Sonett II V4 I have. Earlier in the year I had taken care of the big items, like getting most of the interior installed, adding fog lights, replacing the transmission, rebuilding the suspension etc. But now I need to focus on some of the smaller details. Some of these might be 10 minute tasks, others might take hours. In no particular order, here is my list:
-Build a glovebox door. Sonett II dashes don't have a door for the little dash cubby hole. This is a perfect spot to put a soft pouch of basic tools, so I want a door. I actually started this task today, making a template of cardboard, then transferring to some scrap aluminum sheet I had. After a few hours of fitting, filing, sanding, fittings some more, I have a door. After lunch, I then worked on the hinge and the latch. All of this sounds simple, but like anything inside a Sonett, it means being hunched over to get into and around the dash area. Tomorrow, I will finish this project by painting the door with a texture paint, to help mimic the textured surface of the stock fiberglass dash. Then once everything dries, I can mount it.
DONE - Aluminum door, simple push/pull latch mechanism.
-Paint dash. The Sonett dash is a black fiberglass piece. It is discolored in spots, and the original owner Fred Champion, had mounted a bunch of hillclimb decals/stickers all over it. So there is lots of glue residue that will not clean off. Well, the glue has cleaned off, but it left the dash discolored. So I need to paint everything flat black. It would be nice if the dash was easy to take out, but this is a Sonett, so it is very fiddly. I've decided to use a long small brush, and do a stipple type treatment using flat paint. Because of the textile, I don't need to have a smooth finish.
DONE - I used a small brush attached to a rod in order to get down between the dash and windshield. I laid on several layers, then took a scotch bright pad to smooth it out.
-Finish interior upholstery. I still need to install the side pieces in the trunk area, and create a trunk door carpet. I either need to find some carpet that matches the floor carpet (grey) or just use some black carpet for the trunk door. Truth be told, you can't actually see the trunk door carpet at all, unless you open it. I also need to get some black vinyl for the A-pillars.
Nearly done. Got the trunk area finished, had to fab up new backer boards for the trunk side panels. Last items include a trunk door carpet and replace the kick panels up front.
-Windshield "tint" removal. There was a 4" section of interior window film on the windshield. About half of it is missing, so it is ugly. I'm hoping the hair drier and some blades will make quick work of it.
DONE
-Install new springs. When I built the coilover suspension setup, I used 2.5" ID coilover springs. For some reason, I had visions of occasionally autocrossing Freddy, and fit some 250# front springs, and 150# rear springs. The car actually rides pretty good for those spring rates, but I just don't need them. And would prefer a softer ride to deal with all the shitty local city streets. As luck would have it, Summit Racing had the exact springs I wanted to use on sale. 150# fronts 10" long, and 100# rears 10" long. These are still a fair uprate over the stock spring rates, so I'm not making Freddy a limo. In fact, the springs we used to race on measured out at 120# front and only 78# rear.
DONE. It rides great now!
-"Fix" clutch release arm and/or slave cylinder. Since installing the new trans, the clutch slave cylinder will go soft after a few days sitting in the garage. It only needs one pump to firm up, and is fine the rest of the day. Mr. A thinks the aftermarket slave cylinder is the culprit, since it isn't a Saab original. But it never did this for the 6 months I owned it before installing the new trans with the new release arm mechanism. So I might need to do some further bleeding or fiddling.
No amount of bleeding fixes it. I'm stumped.
-Paint sun visors black. They are currently a dirty light grey. Luckily, I have some black vinyl paint.
DONE.
-Fix windshield wiper motor. I installed a freshly rebuilt wiper motor when I installed the new transmission. But after getting it installed, I turned the wipers on. It moved 1/2" then popped the fuse. So I installed a new fuse, and it popped it the second time. So I stopped caring, since I likely won't be driving Freddy on stormy days. But it would be nice to find out why the fuse is popping.
DONE. The wires at the motor harness were in the wrong position, So I rewired the harness plug, and it works now.
-Shorten the little bolts that mount the led turn signals to the chrome accent bar in the grill. These have a special head that slides inside the piece of chrome trim, sort of like a T-slot bolt. but the bolt itself is nearly 1.5" long, when in reality I need 1/2" So if you crawl down on your knees, you see an ugly bit of bolt sticking out. I'll either cut the bolts short, or make a t-slot bolt out of a shorter bolt. then paint them black.
DONE.
-"Play" with fuel level sender unit. Freddy sports an aluminum gas tank, that uses a non-stock fuel sender unit. It works, but when the tank is full, the gas gauge read about 5/8 full. Seems to be a difference in the amount of ohms being sent between the sender unit and the gauge. I have no idea what the sender unit looks like, but I assume it has some sort of float on an arm that moves up and down with the level in the tank. Perhaps the arm can be tweeked to allow the float to measure more full, when full. This is WAY THE HELL DOWN THE LIST because anything involving work in the trunk area of a Sonett II is a massive pain the ass. You either start by removing both seats, then hunch over the bulkhead and essentially work backwards on everything. Or you crawl through the tiny luggage door, and cuss an almighty torrent about baby jesus. Just thinking about doing this, makes me not want to do it at all.
I cannot convince myself to give two shits about this issue. Crawling in the back of this car is not high on my list of things I want to do.
The last item is a wish list item. I'm thinking of splurging on a wideband sensor/gauge to help tune Freddy. These items have gotten way cheaper, and way easier to install. In fact, I don't really to install it, as it can be a temporary install just for the initial tuning. This would involve installing a O2 sensor bung in the exhaust, and wiring the wideband gauge. Likely just a keyed power source and a ground. And then find a temp spot for a small 2-1/8" gauage. I'm thinking of using the Innovative MTX-L 3844 setup. Only $166 on amazon prime, and comes with a nice long 10' cable. So the O2 sensor could be back in the tailpipe piece, so I don't have to drop the entire exhaust to weld in the bung. This might be a nice Christmas bonus splurge.
Haven't pulled the trigger on this yet, and not sure I'm going to. I might instead visit the local dyno, and spend an hour tuning it. I can get a few runs in, and change jets if need be. Dyno time actually costs less than the wideband setup.
Okay, there is the list. I'm sure there will be more items that pop up, but this should keep me busy all winter. I'm really enjoying having Freddy. We took him down to Midtown Local for breakfast this morning, and he is really getting civilized. I, on the other hand, always have to get used to driving a manual trans equipped car, and one with a carburetor that is a bit cold blooded. Those first few blocks always crack me up.
-Build a glovebox door. Sonett II dashes don't have a door for the little dash cubby hole. This is a perfect spot to put a soft pouch of basic tools, so I want a door. I actually started this task today, making a template of cardboard, then transferring to some scrap aluminum sheet I had. After a few hours of fitting, filing, sanding, fittings some more, I have a door. After lunch, I then worked on the hinge and the latch. All of this sounds simple, but like anything inside a Sonett, it means being hunched over to get into and around the dash area. Tomorrow, I will finish this project by painting the door with a texture paint, to help mimic the textured surface of the stock fiberglass dash. Then once everything dries, I can mount it.
DONE - Aluminum door, simple push/pull latch mechanism.
-Paint dash. The Sonett dash is a black fiberglass piece. It is discolored in spots, and the original owner Fred Champion, had mounted a bunch of hillclimb decals/stickers all over it. So there is lots of glue residue that will not clean off. Well, the glue has cleaned off, but it left the dash discolored. So I need to paint everything flat black. It would be nice if the dash was easy to take out, but this is a Sonett, so it is very fiddly. I've decided to use a long small brush, and do a stipple type treatment using flat paint. Because of the textile, I don't need to have a smooth finish.
DONE - I used a small brush attached to a rod in order to get down between the dash and windshield. I laid on several layers, then took a scotch bright pad to smooth it out.
-Finish interior upholstery. I still need to install the side pieces in the trunk area, and create a trunk door carpet. I either need to find some carpet that matches the floor carpet (grey) or just use some black carpet for the trunk door. Truth be told, you can't actually see the trunk door carpet at all, unless you open it. I also need to get some black vinyl for the A-pillars.
Nearly done. Got the trunk area finished, had to fab up new backer boards for the trunk side panels. Last items include a trunk door carpet and replace the kick panels up front.
-Windshield "tint" removal. There was a 4" section of interior window film on the windshield. About half of it is missing, so it is ugly. I'm hoping the hair drier and some blades will make quick work of it.
DONE
-Install new springs. When I built the coilover suspension setup, I used 2.5" ID coilover springs. For some reason, I had visions of occasionally autocrossing Freddy, and fit some 250# front springs, and 150# rear springs. The car actually rides pretty good for those spring rates, but I just don't need them. And would prefer a softer ride to deal with all the shitty local city streets. As luck would have it, Summit Racing had the exact springs I wanted to use on sale. 150# fronts 10" long, and 100# rears 10" long. These are still a fair uprate over the stock spring rates, so I'm not making Freddy a limo. In fact, the springs we used to race on measured out at 120# front and only 78# rear.
DONE. It rides great now!
-"Fix" clutch release arm and/or slave cylinder. Since installing the new trans, the clutch slave cylinder will go soft after a few days sitting in the garage. It only needs one pump to firm up, and is fine the rest of the day. Mr. A thinks the aftermarket slave cylinder is the culprit, since it isn't a Saab original. But it never did this for the 6 months I owned it before installing the new trans with the new release arm mechanism. So I might need to do some further bleeding or fiddling.
No amount of bleeding fixes it. I'm stumped.
-Paint sun visors black. They are currently a dirty light grey. Luckily, I have some black vinyl paint.
DONE.
-Fix windshield wiper motor. I installed a freshly rebuilt wiper motor when I installed the new transmission. But after getting it installed, I turned the wipers on. It moved 1/2" then popped the fuse. So I installed a new fuse, and it popped it the second time. So I stopped caring, since I likely won't be driving Freddy on stormy days. But it would be nice to find out why the fuse is popping.
DONE. The wires at the motor harness were in the wrong position, So I rewired the harness plug, and it works now.
-Shorten the little bolts that mount the led turn signals to the chrome accent bar in the grill. These have a special head that slides inside the piece of chrome trim, sort of like a T-slot bolt. but the bolt itself is nearly 1.5" long, when in reality I need 1/2" So if you crawl down on your knees, you see an ugly bit of bolt sticking out. I'll either cut the bolts short, or make a t-slot bolt out of a shorter bolt. then paint them black.
DONE.
-"Play" with fuel level sender unit. Freddy sports an aluminum gas tank, that uses a non-stock fuel sender unit. It works, but when the tank is full, the gas gauge read about 5/8 full. Seems to be a difference in the amount of ohms being sent between the sender unit and the gauge. I have no idea what the sender unit looks like, but I assume it has some sort of float on an arm that moves up and down with the level in the tank. Perhaps the arm can be tweeked to allow the float to measure more full, when full. This is WAY THE HELL DOWN THE LIST because anything involving work in the trunk area of a Sonett II is a massive pain the ass. You either start by removing both seats, then hunch over the bulkhead and essentially work backwards on everything. Or you crawl through the tiny luggage door, and cuss an almighty torrent about baby jesus. Just thinking about doing this, makes me not want to do it at all.
I cannot convince myself to give two shits about this issue. Crawling in the back of this car is not high on my list of things I want to do.
The last item is a wish list item. I'm thinking of splurging on a wideband sensor/gauge to help tune Freddy. These items have gotten way cheaper, and way easier to install. In fact, I don't really to install it, as it can be a temporary install just for the initial tuning. This would involve installing a O2 sensor bung in the exhaust, and wiring the wideband gauge. Likely just a keyed power source and a ground. And then find a temp spot for a small 2-1/8" gauage. I'm thinking of using the Innovative MTX-L 3844 setup. Only $166 on amazon prime, and comes with a nice long 10' cable. So the O2 sensor could be back in the tailpipe piece, so I don't have to drop the entire exhaust to weld in the bung. This might be a nice Christmas bonus splurge.
Haven't pulled the trigger on this yet, and not sure I'm going to. I might instead visit the local dyno, and spend an hour tuning it. I can get a few runs in, and change jets if need be. Dyno time actually costs less than the wideband setup.
Okay, there is the list. I'm sure there will be more items that pop up, but this should keep me busy all winter. I'm really enjoying having Freddy. We took him down to Midtown Local for breakfast this morning, and he is really getting civilized. I, on the other hand, always have to get used to driving a manual trans equipped car, and one with a carburetor that is a bit cold blooded. Those first few blocks always crack me up.
Subscribe to:
Posts (Atom)

































The engine is in









